Ξ Acoustic Cladding
Natural wood cladding with four levels of acoustic damping. The models can be combined with each other and with non-acoustic coatings. A proper selection of the model and increasing the percentage of acoustical cladding allows any space to obtain the desired acoustic damping.
The new line from MOLDURAS DEL NOROESTE has maximum absorption around the frequencies of interest, which can address an effective acoustic treatment in midrange frequencies and thus verify compliance with the CTE DB HR in those areas that are subject to legal limits (classrooms, conference rooms, restaurants / dining rooms in public buildings, etc). This is the case of the NOBLEACÚSTIC and NOBLEACÚSTIC INTENSO ranges in medium-high frequencies (profiles R5T16, R5T32).
The SEMIACOUSTIC INTENSO and SEMIACOUSTIC range complements the NOBLEACOUSTIC INTENSO range, allowing the control of reverberation in lower frequencies to be addressed in order to obtain a sound with better tonal balance in rooms that combine both solutions (profiles R2T16, R2T32).
They combine perfectly with profile 528 to help integrate the acoustic performance on walls and ceilings. The spacing and the grooves have a 3.5 mm width, obtaining a very intentioned effect of a continuous surface.
Very suitable cladding for spaces that require a high decorative level, integrating the service with the environment.
The colours of this series are:
*Image shades may vary depending on the computer…
≅ Profile features:
* All acoustic profiles are combinable with profile 528 [it requires 30×30 batten]
≅ Treatments and finishes:
MN – NATURAL WOOD
Standard treatment provided in a raw and smooth brushed finish.
Finish with a water-based matt varnish, smooth surface pleasant to touch surface. It is offered in a wide variety of hues.
Acoustic coatings could also be compatible with the flame retardant properties. Check with the technical department.
Interior acoustic cladding.
Wall and ceiling.